The heat shrinkable film packaging machine is very useful, but customers often encounter problems when using the heat shrink packaging machine. What problems will the heat shrink packaging machine encounter during use? How to solve it? Today, Xiaobian will share with you the experience!

1. When the heat shrink packaging machine is in the packaging production, the heating temperature of the packaging part is slow or can not reach the standard packaging temperature (above 160 °C), and the packaging can not achieve the expected packaging effect. What should I do? (Common knowledge extension: heat shrink packaging machine maximum temperature)
Solution: First of all, you should first check the main power line of the heater. The line of the heater is the main power line through a magnetic switch and then to the electric heating tube. Therefore, it should first check whether the contacts of the magnetic switch are normal.

2. When the equipment is working, the film material is easy to be offset and cannot be fed normally, so that the heat shrink packaging machine can not heat shrink the package of the object normally. How to adjust?
Solution: The film roll position and tension balance bar can be adjusted. If both are invalid, it can be solved by adjusting the angle of the upper set. The upper film is offset from the entrainment chain, and the upper triangular plate can be adjusted in a clockwise direction; if the following film material is offset from the entrainment chain, the upper triangular plate can be adjusted counterclockwise. This will solve this problem.

3. When carrying out multi-objects bundle packaging, the equipment can not detect the packaged object, and damage the packaging during packaging, so that the packaging work cannot be carried out. What should I do?
Solution: This happens because the gap between the objects in the heat shrink packaging machine affects the detection of the electric eye during the bundle packaging, and only needs to adjust the angle of the electric eye detection of the heat shrink packaging machine to an oblique angle to avoid the above phenomenon. The production.